Teappcm - TEAP PCM

Teappcm, is the several decades old manufacturer supplier exporter of High Purity Chemicals including Pharmaceutical Grade Excepients like IP BP JP USP Ph Eur FCC Food Grade ACS Reagent Grade of Chemicals in India USA UAE etc. It has several associated manufacturing facilities spread across the globe. Order quantities ranging from grams, killograms to container loads are given equal attention. The participating units have one or more of the certifications like Good Manufacturing Practice, Good Laboratory Practice, ISO-9001, ISO-22000, Halal & Kosher Cettification. We also have "REACH" Preregistration.

Chemical Products

Ammonium Chloride Crystals Granules Blocks Pellets Tablets USP BP IP ACS Analytical Reagent FCC Food Grade Suppliers Exporters

SPECIFICATIONS OF PURE GRADE AMMONIUM CHLORIDE
Pure. Pharma & Battery Grade Anti-caking & Uncoated Extra Pure
Dry Basis Assay (NH4Cl)= 99.% minimum Dry Basis Assay (NH4Cl)= 99.5% minimum
Moisture= 1% maximum Moisture= 0.5% maximum
Iron= 20 ppm maximum Iron= 5 ppm maximum
Sulphate= 0.1% maximum Sulphate= 0.015% maximum
Residue on Ignition= 0.5% maximum Residue on Ignition= 0.3% maximum
pH of 2% Solution= 4.0-5.5 pH of 2% Solution= 4.0-5.5
Matter insoluble in water= 0.01% maximum Matter insoluble in water= 0.005% maximum
Heavy Metals as Pb= 5 ppm maximum Heavy Metals as Pb= 1 ppm maximum
Arsenic= 5 ppm maximum Arsenic= 1 ppm maximum
Packing will be 25/50kg in HMHDP bags placed in an HDPE bag or drum or in Jumbo bags or as desired by the buyer.

Ammonium Chloride BP
NH4Cl

DEFINITION
Content or Assay: 99.0 per cent to 100.5 per cent (On dried substance basis).

CHARACTERS
Appearance: White or almost white, crystalline powder or colorless crystals.
Solubility: Freely soluble in water.

IDENTIFICATION
A. It gives the reactions of chlorides.
B. 10 ml of solution gives the reaction of ammonium salts.

TESTS
Solution S: A 10% solution:
Appearance of solution: Solution is clear and colorless.
Acidity or alkalinity: To 10 ml of solution S add 0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the color of the indicator.
Bromides and iodides: To 10 ml of solution S add 0.1 ml of dilute hydrochloric acid R and 0.05 ml of chloramine solution. After 1 min, add 2 ml of chloroform R and shake vigorously. The chloroform layer remains colorless.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.00 g by drying in an oven at 105 °C for 2 h.
Sulphated ash: Maximum 0.1 per cent, determined on 2.0 g.


Ammonium Chloride USP
NH4Cl 53.49

Assay: Ammonium Chloride contains not less than 99.5 percent and not more than 100.5 percent of NH4Cl, calculated on the dried basis.
Identification: A solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0, in a solution (1 in 20).
Loss on drying: Dry it over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition: Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture gently until volatilization is complete: the residue is white, and when ignited, not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate: Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.


Ammonium Chloride FCC Food Grade
NH4Cl Formula wt 53.49

DESCRIPTION
Ammonium Chloride occurs as colorless crystals or as a white, fine or coarse, crystalline powder. It is somewhat hygroscopic. One gram dissolves in 2.6 mL of water at 25°, in 1.4 mL of boiling water, in about 100 mL of alcohol, and in about 8 mL of glycerin. The pH of a 1:20 solution is between 4.5 and 6.0.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Ammonium and for Chloride.
Assay: Not less than 99.0% of NH4Cl after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying: Not more than 0.5%.

Ammonium Chloride ACS Analytical Reagent
NH4Cl Formula Wt 53.49
CAS Number 12125–02–9

REQUIREMENTS
Assay: ≥99.5% NH4Cl
pH of a 5% solution: 4.5–5.5 at 25 °C

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Residue after ignition: 0.01%
Calcium (Ca): 0.001%
Magnesium (Mg): 5 ppm
Heavy metals (as Pb): 5 ppm
Iron (Fe): 2 ppm
Phosphate (PO4): 2 ppm
Sulfate (SO4): 0.002%

Ammonium Chloride Crystals Suppliers Ammonium Chloride Granules Suppliers Ammonium Chloride Tablets Suppliers

Please contact us for Further Information and Ammonium Chloride Supplier's Safety Data Sheet.

Ammonium Chloride Suppliers:

Teappcm
TEL: 91-22-23770100, 23774610, 23723564. FAX: 91-22-23728264.

Email: anmol@pcmenergy.com


Barter

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you

We are exporters to USA, Canada,  UAE, Europe, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Sweden, Finland, Norway, Netherlands, Denmark Greenland, Norway, UK, Ireland, Germany, Belgium, Switzerland, Czech Rep., Slovakia, Scotland, Poland, Belarus, Germany, Austria, France, Ukraine, Australia, Spain, Italy, Vietnam, Thailand, etc.