Manganese Chloride Tetrahydrate Anhydrous Suppliers

Teappcm, is the several decades old manufacturer supplier exporter of High Purity Chemicals including Pharmaceutical Grade Excepients like IP BP JP USP Ph Eur FCC Food Grade ACS Reagent Grade of Chemicals in India USA UAE etc. It has several associated manufacturing facilities spread across the globe. Order quantities ranging from grams, killograms to container loads are given equal attention. The participating units have one or more of the certifications like Good Manufacturing Practice, Good Laboratory Practice, ISO-9001, ISO-22000, Halal & Kosher Cettification. We also have "REACH" Preregistration.

Manganese Chloride Tetrahydrate Anhydrous USP ACS Reagent FCC Food grade Suppliers Exporters

It occurs as large, irregular, pink, translucent crystals. It is freely soluble in water at room temperature and very soluble in hot water.

Assay: 98.0% of MnCl2·4H2O on as it is basis. (without drying)
Insoluble Matter: Not more than 0.005%.
Iron: Not more than 5 mg/kg.
Lead: Not more than 4 mg/kg.
pH of a 5% Solution: Between 4.0 and 6.0.
Substances Not Precipitated by Sulfide: Not more than 0.2%, after ignition.
Sulfate: Not more than 0.005%.

Manganese Chloride Tetrahydrate USP Grade
MnCl2.4H2O --- 197.90
Manganese (2+) chloride tetrahydrate [13446-34-9].
Anhydrous 125.84 [7773-01-5].

Manganese Chloride contains not less than 98.0 percent and not more than 101.0 percent of MnCl2, calculated on the dried basis.

Identification:
A: Yields white, curdy precipitate of silver chloride with silver nitrate TS, which is insoluble in nitric acid. After being washed with water, this precipitate is soluble in a slight excess of 6 N ammonium hydroxide.
B: It meets the requirements of the test for Manganese.
pH: between 3.5 and 6.0, 10 g dissolved in 200 mL of carbon dioxide- and ammonia-free water being used.
Loss on drying: Dry it at 50 for 2 hours, then raise the temperature to 150 for 24 hours: it loses between 36.0% and 38.5% of its weight.
Insoluble matter: Transfer 10 g to a 250-mL beaker, add 150 mL of water, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 1 hour, and pass through a tared, fine-porosity filtering crucible. Rinse the beaker with hot water, passing the rinsings through the filter, and finally wash the filter with additional hot water. Dry the filter at 105C: the residue weighs not more than 0.5 mg (0.005%).
Sulfate: A 2.0 g portion shows no more sulfate than corresponds to 0.10 mL of 0.020 N sulfuric acid (0.005%).
Substances not precipitated by ammonium sulfide: Dissolve 2.0 g in about 90 mL of water, add 5 mL of ammonium hydroxide, and warm the solution to about 80 . Pass a stream of hydrogen sulfide through the solution for 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a fine-porosity filter, and transfer 50.0 mL to an evaporating dish that previously has been ignited and tared. Evaporate the filtrate to dryness, cool, add 0.5 mL of sulfuric acid, heat gently to remove the excess acid, and ignite at 800 ± 25 for 15 minutes: the weight of the residue is not greater than 2.0 mg (0.2% as sulfate).
Iron: Dissolve 2.0 g in 40 mL of water: the limit is 5 µg per g.
Zinc: Dissolve 1 g in a mixture of 48 mL of water and 2 mL of sulfuric acid, and add, slowly and with constant agitation, 1 mL of potassium ferrocyanide solution (1 in 100): no turbidity is produced within 5 minutes.
Heavy metals: the limit is 5 µg per g.

Manganese Chloride Tetrahydrate ACS Reagent Grade
Manganous Chloride Tetrahydrate
MnCl2 . 4H2O
Formula Wt 197.90
CAS Number 13446-34-9

REQUIREMENTS
Assay: 98.0-101.0% MnCl2 . 4H2O
pH of a 5% solution: 3.5-6.0 at 25C

MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Sulfate (SO4): 0.005%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%

Manganese Chloride FCC Grade
MnCl2 Formula wt, anhydrous 125.84
MnCl2·4H2O Formula wt, tetrahydrate 197.91
CAS: anhydrous [7773-01-5]
CAS: tetrahydrate [13446-34-9]

DESCRIPTIONIt
occurs as large, irregular, pink, translucent crystals. It is freely soluble in water at room temperature and very soluble in hot water.

REQUIREMENTS
Identification: A 1:20 aqueous solution gives positive tests for Manganese and for Chloride.
Assay: Not less than 98.0% and not more than 102.0% of MnCl2·4H2O.
Insoluble Matter: Not more than 0.005%.
Iron: Not more than 5 mg/kg.
Lead: Not more than 4 mg/kg.
pH of a 5% Solution: Between 4.0 and 6.0.
Substances Not Precipitated by Sulfide: Not more than 0.2%, after ignition.
Sulfate: Not more than 0.005%.

Manganese Chloride Tetrahydrate Anhydrous Suppliers:

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you

We are exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Sweden, Finland, Norway, Netherlands, Denmark Greenland, Norway, UK, Ireland, Germany, Belgium, Switzerland, Czech Rep., Slovakia, Scotland, Poland, Belarus, Germany, Austria, France, Ukraine, Australia, Spain, Italy, Vietnam, Thailand, etc.