Manganese Sulfate BP USP ACS Reagent FCC Food Grade Suppliers

Teappcm, is the several decades old manufacturer supplier exporter of High Purity Chemicals including Pharmaceutical Grade Excepients like IP BP JP USP Ph Eur FCC Food Grade ACS Reagent Grade of Chemicals in India USA UAE etc. It has several associated manufacturing facilities spread across the globe. Order quantities ranging from grams, killograms to container loads are given equal attention. The participating units have one or more of the certifications like Good Manufacturing Practice, Good Laboratory Practice, ISO-9001, ISO-22000, Halal & Kosher Cettification. We also have "REACH" Preregistration.

Manganese Sulfate Anhydrous Monohydrate Tetrahydrate Commercial Pure & BP USP ACS Reagent FCC Food Grade Suppliers Exporters

CHARACTERS
Appearance: Pale pink crystalline powder, slightly hygroscopic.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. Solution S (see Tests) gives reaction of sulphates.
B. Dissolve 50 mg in 5 ml of water. Add 0.5 ml of ammonium sulphide solution. A pale pink precipitate is formed which dissolves on the addition of 1 ml of anhydrous acetic acid.
C. Loss on ignition (see Tests).

TESTS
Solution S: Dissolve 10.0 g in distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is not more opalescent than reference suspension.
Chlorides: Maximum 100 ppm.
Iron: Maximum 10 ppm, determined on solution S.
Zinc: Maximum 50 ppm.
Heavy metals: Maximum 20 ppm.
Loss on ignition: 10.0 per cent to 12.0 per cent, determined on 1.00 g at 500 ± 50C.

DEFINITION
Manganese Sulphate is manganese (II) sulphate tetrahydrate. It contains not less than 98.0% and not more than 100.5% of MnSO4, calculated with reference to the substance ignited at 450 to 500C.

CHARACTERISTICS
Pale pink crystals or crystalline powder.
Freely soluble in water; practically insoluble in ethanol (96%).

IDENTIFICATION
A. Dissolve 0.5 g in 10 ml of water and add 1 ml of sodium sulphide solution. A pink precipitate is produced which is soluble in 6M acetic acid.
B. To 0.1 g add 2 g of lead-(IV) oxide and 5 ml of nitric acid , boil gently for a few minutes, add 100 ml of water and filter. A purple solution is produced.
C. Yields the reactions characteristic of sulphates.

TESTS
Arsenic: 4 ppm
Heavy metals: 40 ppm
Iron: 40 ppm
Zinc: 500 ppm
Chloride: 330 ppm
Loss on ignition: When ignited to constant weight at 450° to 500°, loses 31.0 to 34.0% of its weight. Use 1 g.

Manganese Sulfate USP
MnSO4·H2O 169.02
Sulfuric acid, manganese(2+) salt (1:1) monohydrate.
Manganese(2+) sulfate (1:1) monohydrate [10034-96-5]
Anhydrous 151.00 [7785-87-7]

Manganese Sulfate contains not less than 98.0 percent and not more than 102.0 percent of MnSO4·H2O.

Identification: A solution (1 in 10) responds to the tests for Manganese 191 and for Sulfate.
Loss on ignition: Ignite it at 450 to constant weight: it loses between 10.0% and 13.0% of its weight.
Substances not precipitated by ammonium sulfide: Dissolve 2.0 g in 90 mL of water, add 5 mL of ammonium hydroxide, warm the solution, and pass hydrogen sulfide through the solution for about 30 minutes. Dilute with water to 100 mL, mix, and allow the precipitate to settle. Decant the supernatant through a filter, transfer 50 mL of the clear filtrate to a tarred dish, evaporate to dryness, and ignite, gently at first and finally at 800 ± 25 : the weight of the residue does not exceed 5 mg (0.5%).

Manganese Sulfate FCC Food Grade
MnSO4-H2O Formula wt 169.02
CAS: [7785-87-7]

DESCRIPTION
Manganese Sulfate occurs as a pale-pink, granular powder. It is freely soluble in water, but is insoluble in alcohol.

REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for Manganese and for Sulfate.
Assay: Not less than 98.0% and not more than 102.0% of MnSO4·H2O.
Arsenic: Not more than 3 mg/kg.
Lead: Not more than 4 mg/kg.
Loss on Heating: Between 10.0% and 13.0%.
Selenium: Not more than 0.003%.

Manganese Sulfate Monohydrate ACS Analytical Reagent
MnSO4-H2O
Formula Wt 169.02
CAS Number 10034-96-5

REQUIREMENTS
Assay: 98.0-101.0% MnSO4-H2O
Loss on ignition: 10.0-12.0%
Substances reducing permanganate: Passes test

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.005%
Calcium (Ca): 0.005%
Magnesium (Mg): 0.005%
Nickel (Ni): 0.02%
Potassium (K): 0.01%
Sodium (Na): 0.05%
Zinc (Zn): 0.005%
Heavy metals (as Pb): 0.002%
Iron (Fe): 0.002%

Manganese Sulfate Suppliers:

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you

We are exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Sweden, Finland, Norway, Netherlands, Denmark Greenland, Norway, UK, Ireland, Germany, Belgium, Switzerland, Czech Rep., Slovakia, Scotland, Poland, Belarus, Germany, Austria, France, Ukraine, Australia, Spain, Italy, Vietnam, Thailand, etc.