Sodium Molybdate BP Ammonium Molybdate USP ACS Reagent Suppliers

Teappcm, is the several decades old manufacturer supplier exporter of High Purity Chemicals including Pharmaceutical Grade Excepients like IP BP JP USP Ph Eur FCC Food Grade ACS Reagent Grade of Chemicals in India USA UAE etc. It has several associated manufacturing facilities spread across the globe. Order quantities ranging from grams, killograms to container loads are given equal attention. The participating units have one or more of the certifications like Good Manufacturing Practice, Good Laboratory Practice, ISO-9001, ISO-22000, Halal & Kosher Cettification. We also have "REACH" Preregistration.

Sodium Molybdate BP Ammonium Molybdate USP ACS Reagent Grade Suppliers Exporters

Specifications of Commercial Pure Sodium Molybdate Dihydrate:
Na2MoO4,2H2O -- 241.9 -- 10102-40-6
Appearance: White Crystalline Powder
Color of the solution: 10% solution in distilled water is clear and colorless
Assay: 99% minimum
MoO3 content: >58.37%
Mo content: >38.86%
pH: 9
Iron: 50 ppm maximum
Insoluble matter: Maximum 0.02%

Sodium Molybdate Dihydrate BP Grade
Ph Eur
Na2MoO4,2H2O -- 241.9 -- 10102-40-6

CHARACTERS
Appearance: White or almost white powder or colourless crystals.
Solubility: Freely soluble in water.

IDENTIFICATION
A. Loss on drying (see Tests).
B. Dissolve 0.2 g in 5 ml of a mixture of equal volumes of nitric acid and water and add 0.1 g of ammonium chloride. Add 0.3 ml of disodium hydrogen phosphate solution and heat slowly at 50-60C. A yellow precipitate is formed.
C. Dissolve 0.15 g in 2 ml of water, the solution gives reaction of sodium.

TESTS
Solution S: Dissolve 10.0 g in water and dilute to 50 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Chlorides: Maximum 50 ppm.
Phosphates: Maximum 200 ppm.
Ammonium: Maximum 10 ppm, determined on 0.10 g.
Heavy metals: Maximum 10 ppm.
Loss on drying: 14.0 per cent to 16.0 per cent, determined on 1.000 g by drying in an oven at 140C for 3 h.

Specifications of Commercial Pure Ammonium Molybdate Dihydrate:
(NH4)6Mo7O24-4H2O -- 1235.86 -- 12054-85-2
Appearance: White Crystalline Powder with slight greenish yellow tinge
Assay: 99% minimum
MoO3 content: >80%
Mo content: >53.25%
Sulfate: 0.005% maximum
Lead: 0.001% maximum
Copper: 0.001% maximum.

Ammonium Molybdate USP
(NH4)6Mo7O24-4H2O 1235.86
Molybdate (Mo7O24 6 ), hexaammonium, tetrahydrate.
Hexaammonium molybdate tetrahydrate [12054-85-2].
Ammonium Molybdate contains not less than 99.3 percent and not more than 101.8 percent of (NH4)6Mo7O244H2O.
Identification: Dissolve 0.6 g of it in 1.4 mL of water and 1.45 mL of ammonium hydroxide. Cool this mixture, and add slowly, with mixing, 7.2 mL of a well-cooled mixture of 3.2 mL of nitric acid and 4 mL of water. Allow to stand for 24 to 48 hours, and filter through a sintered-glass filter. To 5 mL of the filtrate add 2 mL of dibasic sodium phosphate TS: a yellow precipitate is formed, and it is soluble in an excess of 6 N ammonium hydroxide.
Insoluble substances: Dissolve 20 g in 200 mL of water in a beaker, heat to boiling, cover, and heat on a steam bath for 1 hour. Filter the hot solution through a tared filtering crucible, wash the insoluble residue with hot water, and dry at 105 for 2 hours: the weight of the residue so obtained does not exceed 1 mg (0.005%).
Chloride: Maximum 0.002%.
Limit of nitrate: To pass the test.
Sulfate: Maximum 0.02%.
Arsenate, phosphate, and silicate: To pass the test.
Phosphate: Maximum 5 ppm.
Magnesium and alkali salts: Maximum 0.02%.
Heavy metals: The limit is 10 µg per g.
Assay: Dissolve about 1 g of Ammonium Molybdate, accurately weighed, in a mixture of 10 mL of water and 1 mL of ammonium hydroxide in a 250-mL volumetric flask, dilute with water to volume, and mix. Filter the solution, and transfer 50.0 mL of the filtrate to a 600-mL beaker. Add 250 mL of water, 20 g of ammonium chloride, 15 mL of hydrochloric acid, and 0.15 mL of methyl orange TS, heat nearly to boiling, and add 18 mL of lead acetate TS. To the hot solution add, slowly and with constant stirring, a saturated solution of ammonium acetate until the color turns yellow, and then add 15 mL of lead acetate TS. Cover the beaker, and heat just below the boiling temperature until the precipitate has settled. Filter through a tared, porous porcelain crucible, wash with seven or eight successive portions of a mixture of water, saturated ammonium acetate solution, and nitric acid (890:100:10), and finally wash with three successive portions of hot water. Ignite to constant weight at 560C to 625C. Each mg of the lead molybdate so obtained is equivalent to 0.4809 mg of (NH4)6Mo7O244H2O.

Ammonium Molybdate Tetrahydrate ACS AR Analytical Reagent grade
Ammonium Heptamolybdate Tetrahydrate
(NH4)6Mo7O24 · 4H2O
Formula Wt 1235.86
CAS Number 12027-67-7
REQUIREMENTS
Assay (as MoO3): 81.0-83.0%
MAXIMUM ALLOWABLE
Insoluble matter: 0.005%
Chloride (Cl): 0.002%
Nitrate (NO3): Passes test
Arsenate, phosphate, and silicate (as SiO2): 0.001%
Phosphate (PO4): 5 ppm
Sulfate (SO4): 0.02%
Heavy metals (as Pb): 0.001%
Magnesium (Mg): 0.005%
Potassium (K): 0.002%
Sodium (Na): 0.01%

Ammonium Molybdate & Sodium Molybdate Suppliers:

They who love thee on this earth, keep calling on thee and chanting thy beads
Lest thou forgetest.

They assign the credit of their hard work to your blessings
They keep you amused.

They come to thy temple with baskets of fruits, as if you were a glutton
They deny the same to their children.

They offer you milk for a bath and burn the ghee
They hardly understand the meaning of it.

They bring gold and diamonds. They come with beating of drums
They love to advertise their offerings.

They offer you a small bribe as advance for booty, called lottery
They love to dream.

I do not bow down at your door
I do not bargain for booty
Your promise of the heaven does not lure me
Your hell-fire does not scare me
I do not even know the proper method of prayer
I do not offer any thing to you
Ages have gone by and I have not seen you my lord
Yet my love for you keeps waiting for you

We are exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Sweden, Finland, Norway, Netherlands, Denmark Greenland, Norway, UK, Ireland, Germany, Belgium, Switzerland, Czech Rep., Slovakia, Scotland, Poland, Belarus, Germany, Austria, France, Ukraine, Australia, Spain, Italy, Vietnam, Thailand, etc.